CP&S Connect
Crane Pumps and Systems on Facebook Crane Pumps and Systems on Twitter Crane Pumps and Systems on YouTube Crane Pumps and Systems on Google+ Crane Pumps and Systems on Linked In

Products - Markets - Industrial - Power Generation

Column & Non- Clog Sump Pumps- Deming

Deming Non- Clog Vertical Column Sump Pumps are designed to handle various fluids from drainage water or any liquid waste containing small, non-fibrous solids to larger industrial processes. Their advanced design provides trouble-free service and low-cost operation. 

Column                                                   
Heads To: 
160 feet                                     
Flows To: 1,600 g.p.m.

Non- Clog
Heads To: 175 feet 
Flows To: 3,600 g.p.m. 
                            

Dewatering Pumps- Barnes & Prosser

If you need unwanted water removed, there is a Prosser portable electric submersible pump that can do the job. Prosser Standard Line pumps offer high head or high volume performance and are available in over 100 outstanding models.
Heads To: 240 feet
Flows To: 1,400 g.p.m.

End Suction ANSI Process Pumps- Deming

All purpose centrifugal pump meets the dimensional requirements of ANSI B73.1 mounting specifications, heavy duty service for liquids such as water and light hydrocarbons. 14 sizes available with high temperature ranges to 600 degrees Fahrenheit.

Heads To: 650 feet
Flows To: 1,000 g.p.m.

End Suction Pumps (Frame Mounted/ Close Coupled)- Deming

Deming versatile end-suction pumps are heavy duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial, industrial and municipal needs. Applications include condenser, chilled, and hot water systems in HVAC, process secondary pumping, and municipal drinking water. High efficiencies, robust case construction of cast iron, and impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps. 

Heads To: 780 feet 
Flows To: 4,000 g.p.m.

Inline ANSI Pumps- Deming

Space saving, back pull-out design allows versatile applications in a wide range of industries. Available in 11 size configurations. ANSI pumps meet the dimensional requirements of ANSI B73.2 

Heads To: 390 feet 
Flows To: 1,400 g.p.m.

Non-Clog Pumps (Dry Pit)- Deming

Deming and Weinman horizontal and vertical dry pit pumps are compact in design to meet a wide range of service conditions. Solids handling pumps are available in 25 size configurations to meet specific requirements. 

Heads To: 240 feet 
Flows To: 5,000 g.p.m.

Split Case Pumps- Deming

Deming Horizontal split-case single stage; double suction, general purpose pumps are designed for continuous service handling of both hot and cold fluids.

Vertical Multistage Pumps- Burks

BPV Vertical Multistage pumps provide high pressure pumping while requiring a very small operating space. The wetted parts of these pumps are constructed out of 304 or 316 SS and utilize a standard TC frame motor. 

Heads To: 1,350 feet 
Flows To: 600 g.p.m.

Vertical Process Pumps- Deming

Deming Vertical Process pumps are constructed of corrosion resistant alloys, space saving and always primed. They feature a cantilevered shaft with no submerged bearings to maintain, and broad range of capacity. 

Heads To: 150 feet 
Flows To: 4,000 g.p.m.


PRIVACY STATEMENT
Copyright © 2014 Crane Pumps & Systems. All rights reserved.
'Crane' is a registered trademark of Crane Co.