CP&S Connect
Crane Pumps and Systems on Facebook Crane Pumps and Systems on Twitter Crane Pumps and Systems on YouTube Crane Pumps and Systems on Google+ Crane Pumps and Systems on Linked In

Products - Markets - Industrial - Oil/Gas

End Suction ANSI Process Pumps- Deming

All purpose centrifugal pump meets the dimensional requirements of ANSI B73.1 mounting specifications, heavy duty service for liquids such as water and light hydrocarbons. 14 sizes available with high temperature ranges to 600 degrees Fahrenheit.

Heads To: 650 feet
Flows To: 1,000 g.p.m.

End Suction Pumps (Frame Mounted/ Close Coupled)- Burks

Burks versatile end-suction pumps are heavy duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial, industrial and municipal needs. Applications include condenser, chilled, and hot water systems in HVAC, process secondary pumping, and municipal drinking water. High efficiencies, robust case construction of cast iron, and impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps. 

Heads To: 380 feet 
Flows To: 1,100 g.p.m.

End Suction Pumps (Frame Mounted/ Close Coupled)- Deming

Deming versatile end-suction pumps are heavy duty, general purpose centrifugal pumps with heavy wall castings suitable for many commercial, industrial and municipal needs. Applications include condenser, chilled, and hot water systems in HVAC, process secondary pumping, and municipal drinking water. High efficiencies, robust case construction of cast iron, and impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps. 

Heads To: 780 feet 
Flows To: 4,000 g.p.m.

Inline ANSI Pumps- Deming

Space saving, back pull-out design allows versatile applications in a wide range of industries. Available in 11 size configurations. ANSI pumps meet the dimensional requirements of ANSI B73.2 

Heads To: 390 feet 
Flows To: 1,400 g.p.m.

Regenerative Turbine Pumps- Burks

Burks Turbine unique design is engineered for high pressure, low flow applications. Ideal for small boiler applications. The raceway conducts fluid into the impeller and then provides a channel for the liquid to move as it is propelled and energized by the impeller.
Heads To: 350 feet
Flows To: 91 g.p.m.

Vertical Inline Pumps- Burks

For lower volume applications requiring flows up to 80 GPM the Burks GB Series offers a flexible, cost savings solution. Burks GB pumps can be installed in any position; horizontal, vertical or on an angle. Leak proof, self-adjusting mechanical seals and all iron or all bronze construction provide reliable, quality construction. Inline design allows removal
of pumping assembly without disturbing piping for easy maintenance. Standard pump motors have open drip proof construction, are rated with jet pump service factors for continuous duty operation, and come with NEMA standard mounting flange.

Heads To: 110 feet
Flows To: 80 g.p.m.



Vertical Inline Pumps- Weinman

For high volume applications requiring flows up to 1,400 GPM the Weinman 320 Series offers a long life solution. Suction and discharge nozzles are located 180° apart on the same centerline for mounting directly in a pipe line. This eliminates critical pipe alignment for ease of assembly and minimum pipe strain. Leak proof, self-adjusting mechanical seals and bronze wear ring(s) are supplied as standard on certain pumps. A built in purge system assures proper flushing and venting of seals. Motors are standard NEMA J and JM frame, enclosure as specified by customer.

Heads To: 310 feet 
Flows To: 1,500 g.p.m.


PRIVACY STATEMENT
Copyright © 2014 Crane Pumps & Systems. All rights reserved.
'Crane' is a registered trademark of Crane Co.