CP&S Connect
Crane Pumps and Systems on Facebook Crane Pumps and Systems on Twitter Crane Pumps and Systems on YouTube Crane Pumps and Systems on Google+ Crane Pumps and Systems on Linked In

Products - Product Types - Submersible

Packaged Systems- Barnes

Barnes Packaged Plumbing Systems are designed to handle wastes from lavatories, laundry tubs, floor drains, water closets, etc. and will push the water from below ground up to where normal drainage will handle it. Complete packages with basins and controls are available in many different sizes and configurations. 

Heads To: 26 feet 
Flows To: 150 g.p.m.

Residential Sump Pumps (SHUR-Switchâ„¢)- Barnes

Barnes SHUR-Switch™ sump pumps feature low cost, high performance benefits from a rugged, heavy duty design. With upper and lower ball bearings and a heavy duty cast iron vortex impeller. Barnes SP33, SP50 and SP75 sump pumps are robustly designed for long operational life and dependable service. They are further enhanced by a stainless steel shaft and heavy duty seal. Barnes sump pumps save time and replacement costs because they are interchangeable with competing sump pump models. 

Heads To: 33 feet 
Flows To: 80 g.p.m.

Residential Sump Pumps (SP, BP, EP)- Barnes

Barnes sump pumps feature low cost, high performance benefits from a rugged, heavy duty design. With upper and lower ball bearings and a heavy duty cast iron vortex impeller. Barnes SP33, SP50 and SP75 sump pumps are robustly designed for long operational life and dependable service. They are further enhanced by a stainless steel shaft and heavy duty seal. Barnes sump pumps save time and replacement costs because they are interchangeable with competing sump pump models. 

Heads To: 33 feet 
Flows To: 80 g.p.m.

Sewage Ejectors- Barnes

Barnes engineered sewage ejectors are available in 2" & 3" discharge, multiple voltage and phase options to suit most residential and light commercial wastewater applications. All Barnes sewage ejectors are constructed of cast iron motor housing, volutes and impellers and reinforced by a stainless steel shaft and upper and lower ball bearings. 

Heads To: 95 feet 
Flows To: 430 g.p.m.

Submersible Solids Handling Pumps (SE Series)- Barnes

Barnes Non-Clog series of pumps are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Available in both standard and explosion proof applications, Barnes Non-Clog pumps are constructed of durable cast iron, oil filled motors providing a pump tough enough to meet almost any application need. 

Heads To: 126 feet 
Flows To: 960 g.p.m.

Submersible Solids Handling Pumps (SH Series)- Barnes

Barnes Non-Clog series of pumps are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Available in both standard and explosion proof applications, Barnes Non-Clog pumps are constructed of durable cast iron, oil filled motors providing a pump tough enough to meet almost any application need. 

Heads To: 265 feet 
Flows To: 3,400 g.p.m.

Related Accessories

Basins & Covers

A full line of heavy duty fiberglass basins and covers are available for the large jobs requiring extra storage capacity and/or tank depth.

Break Away Fittings

Barnes break away fittings allow pump installation and removal without wet well entry or piping disconnection. Break away fittings provide easy access to all Barnes 1 1/4" (32mm) thru 8" (200mm) submersible pumps; units may be adapted for other submersibles with similar discharge sizes. Available in non-sparking design.

Capacitor/ Relay Packs

Plate mounted capacitor/relay packs are used to assist in retrofitting a single phase SGV or 4SE Barnes pump to another brand control panel.

Control Panels, Alarms, Starters/ Contactors

Alarms
A variety of remote alarms with warning lights and/or annunciators for indoor or outdoor use may be specified. Require 120v power supply.
Simplex for Automatic Pumps  Remote Alarm Light

Starters & Contactors
NEMA 1 Simplex starters and contactors are available as an economic choice for reliable pump operation on single and three phase units up to 25hp.
Starters & Contactors

Control Panels
Barnes control panels provide proven, reliable performance and potential malfunction warning. Simplex and Duplex models are contained within a NEMA 4X enclosure and are available with single or three phase power. All components are UL listed.
Versatrol Standard Panels  Stealth Control Panels

Level Controls, Floats, and Junction Boxes

A full line of Pilot Duty or In-line level controls may be specified to meet pump installation requirements. Junction boxes are available in Simplex and Duplex models with NEMA 4X ratings. UL listed for select models.

Oil Sensor Switch

The Barnes Oil Sensor Switch, BOSS, is designed to provide pump control and alarm notification of potentially threatening water and oil levels in simplex pumping applications. The BOSS features an innovative switch that senses the difference between oil and water to remove water from the tank, while preventing oil from being pumped into the environment.

Oil Sensor Switch Plus

The Barnes Oil Sensor Switch, BOSS, is designed to provide pump control and alarm notification of potentially threatening water and oil levels in simplex pumping applications. The BOSS features an innovative switch that senses the difference between oil and water to remove water from the tank, while preventing oil from being pumped into the environment.  The water/oil will then be manually pumped out by an operator.

Pump Hoists

500lb and 2000lb pump hoists for installation next to wet well cover. Allows safe and easy removal of pump from guide rail systems.

Valves

Check and Ball valves are available in a variety of configurations for shut off, backflow prevention and easy pump removal.


PRIVACY STATEMENT
Copyright © 2014 Crane Pumps & Systems. All rights reserved.
'Crane' is a registered trademark of Crane Co.